Built-in flash
When the
button is pressed, the flash is activated and the picture will be recorded. Use
the Built-in flash in order to record still pictures in dark places.
Each time the icon is selected, the indication changes by one setting in the following order:
ß ([ON]) # ßA ([AUTO]) #
≥ The unit automatically determines if the flash is necessary even when it has been set to
detecting the ambient brightness. (If it determines that the flash is necessary, the
lights up in red.)
∫ To adjust the brightness of the flash
: [PICTURE] # [FLASH LEVEL] # desired setting
MENU
ßi:
Much brighter
ßd0:
Normal
ßj:
Less bright
≥ If the ß indication etc. flashes when the
≥ Do not use with Filter Kit (optional) or Conversion Lens (optional) attached.
≥ The available range of the flash is approx. 1.5 m (4.9 feet) in dark places.
Red-eye Reduction
Reduces the phenomena where human eyes become red from flashes.
≥ The flash is activated 2 times.
≥ The red-eye phenomenon tends to appear in certain recording conditions and more with some
people than with others.
≥ When faces are detected in the Intelligent Auto Mode or Intelligent Auto Plus Mode, the Red-eye
Reduction is set to on.
([OFF])
button is pressed halfway, the flash is not activated.
- 59 -
by
indication