Panasonic HC-V720K Owner's Manual page 132

∫ When connecting by [Manual Setting]
1
Touch [Manual Setting].
2
Touch [INPUT], then enter the SSID of the wireless access point.
≥ For details on how to enter characters, refer to page 65.
≥ When the entry is complete, touch [Enter].
3
Touch [NEXT], and then touch the desired Network Authentication method.
Network authentication type
[Open]
[WEP]
[WPA-PSK]/[WPA2-PSK]
≥ When [WEP] is selected, proceed according to step 5.
4
Touch the desired Encryption method.
≥ If you select [NONE], a message is displayed after completing the connection.
5
(When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.
≥ For details on how to enter characters, refer to page 65.
≥ When the entry is complete, touch [Enter].
6
Touch [NEXT].
≥ A message is displayed when the connection is complete.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j
is displayed on the screen
When the preparations for the Wi-Fi function
complete, you can use the following functions:
j [Link to Cell]
(l
j [DLNA Play]
(l
j [Live Cast]
(l 143)
j [Home Cam]
(l
≥ Check the wireless access points instruction manual and settings when saving a wireless access
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
≥ If no connection can be established, the wireless access point's radio waves may be too weak.
Refer to "Messages"
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
137)
142)
147)
(l 173) and "Troubleshooting"
Encryption types that can be set
[NONE]/[WEP]
There is no setup of an encryption types.
[TKIP]/[AES]
(l 123) and the Wi-Fi connection are
(l 175) for details.
- 132 -