Application (Record)
• For the setting procedures of the menu.
[Quality]
■
Settings:
([Fine]): High quality, priority to picture quality
([Standard]): Standard quality, priority to the number of pictures
●
The setting is fixed to
●
The displayed icons are different in the [3D Photo Mode] Scene Mode:
([3D+Fine]): An MPO picture and a high quality JPEG picture are recorded
simultaneously.
([3D+Standard]): An MPO picture and a standard quality JPEG picture are
[Sensitivity]
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
■
Settings: [AUTO] /
Setting guide
[Sensitivity]
Location
(recommended)
Shutter speed
Interference
Subject blur
●
[AUTO] is automatically set in a range up to 1600 based on subject brightness.
●
[i.ISO] is automatically set in a range up to 1600 based on subject movement and
brightness.
●
The [Sensitivity] is automatically set in the following cases:
• When recording motion pictures
• When [Burst] is set to
●
The shutter speed is restricted as follows based on the [Sensitivity] setting.
[Sensitivity]
[AUTO] /
100/200/400
800/1600
3200
●
Cannot select
●
Cannot select [AUTO] or
, in [High Sens.] Scene Mode.
recorded simultaneously.
[i.ISO] / [100] / [200] / [400] / [800] / [1600] / [3200]
[100]
Bright
(outdoors)
Slow
Low
High
or
Automatically changes depending on the [Sensitivity] setting.
4 - 1/2000th
1 - 1/2000th
1/4 - 1/2000th
[i.ISO] in [Shutter-Priority] Mode.
[i.ISO] in [Manual Exposure] Mode.
(→42)
[3200]
Dark
Fast
High
Low
Shutter speed
- 97 -
Using the [Rec] menu
VQT4P14