Canon PowerShot Pro 90 IS User Manual page 8

Chapter 1
Try It! ImageBrowser
Starting from the ImageBrowser icon
Use this method to start ImageBrowser if you are using a
memory card reader. It may also be used to start ImageBrowser
without connecting a camera or to restart it after exiting.
1.
Double-click the [Canon ImageBrowser] icon on the
desktop.
ImageBrowser starts.
REFERENCE
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Depending on the selections you make during installation, the
Canon ImageBrowser icon may not appear on the desktop. In
this case, start ImageBrowser by double-clicking on the applica-
tion using the following sequence.
Locate and open the [Canon Utilities] folder, then open the
[ImageBrowser] folder and double-click on the [ImageBrowser]
icon.
8
ImageBrowser Software User Guide
Starting ImageBrowser (5/5)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○