Installing Software; Enabling Autoplay - HP nx6115 - Notebook PC Manual

Installing Software

To install software from a CD included with the notebook:
1. Insert the software CD into the optical drive.
❏
❏
2. Click OK.
3. When the installation wizard is displayed, follow the
installation instructions on the screen.
4. Restart the notebook if prompted.
✎
Repeat the installation procedure for all software you want
to install.
✎
WinDVD Creator has specific drive requirements for
proper installation. To install WinDVD Creator, refer to
the instructions provided with the InterVideo WinDVD
Creator CD.

Enabling AutoPlay

AutoPlay is an option in Windows that turns the Autorun feature
on or off. Autorun starts a program or plays a title on a disc as
soon as it is inserted into the drive and the drive door is closed.
By default, AutoPlay is enabled on the notebook.
To disable AutoPlay or to enable AutoPlay if the feature has been
turned off, refer to your operating system documentation or visit
the Microsoft Web site at
Multimedia
If Autorun is enabled, an installation wizard is displayed.
If Autorun is disabled, select Start > Run. Then enter
x:\setup.exe
where is your CD drive designation.
x
http://www.microsoft.com
.
11