Lenovo 88088NU User Manual page 47

Connecting additional serial ATA hard disk drive
A serial hard disk drive can be connected to any available SATA connector.
1. Locate the signal cable that comes with the new drive.
2. Locate the available SATA connector on the system board. See "Identifying
parts on the system board" on page 23.
3. Connect one end of the signal cable to the drive and the other to the available
SATA connector on the system board.
4. Locate one of the extra five-wire power connectors and connect it to the drive.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Closing the cover and connecting the
cables" on page 39.
Chapter 3. Installing options
31