Table of Contents
Advertisement
INSTALLING COLDFUSION 10
Installing the Server Configuration
Creating and editing a new ColdFusion instance
After installing ColdFusion in stand-alone mode, create an instance of ColdFusion using the ColdFusion
Administrator.
1
In the ColdFusion Administrator, go to Enterprise Manager > Instance Manager.
Click Add New Instance.
2
Enter the server name and server directory.
3
4
(Optional) Check Create Windows Service.
Click Submit.
5
In the Instance Manager, start, stop, restart, delete, access website, or access administrator.
Click the Edit icon to edit the instance manager.
6
7
Edit the internal webserver port and load balancing factor.
Load balancing factor represents the load the instance takes up. Load balancing factor is applicable only if the
instance is part of the cluster.
For example, the load balancing factor for the first instance is 1 and that of the second instance is 2. The second
instance receives two times more requests.
Click Submit.
8
Registering a remote instance
Register a new remote instance of ColdFusion using the ColdFusion Administrator.
In the ColdFusion Administrator, click Enterprise Manager > Instance Manager > Register Remote Instance.
1
Specify the details such as instance name, remote host, remote port, http port, and JVM route.
2
Instance name is a string that is used to identify the instance. Remote port and HTTP port are displayed in the
Instance Manager page. These ports are provided in the
the instance. Remote port is the AJP port and the instance port is the connector port.
JVM route is the remote instance name. The JVM route is an attribute that acts as an identifier for a particular
Tomcat worker. JVM route is provided in the
For more information on JVM route, see http://tomcat.apache.org/tomcat-5.5-doc/cluster-howto.html.
Note: A remote instance and a local instance cannot have the same JVM route if they are added in a cluster with sticky
session enabled.
3
If you want remote start and stop functionality over HTTP, enter Admin Component port, Admin Component
user name, and Admin Component password. The default Admin Component port is 8985.
Note: To enable this feature, install admin component on the remote host.
a
In the remote host, open the
Search for the string,
b
org.mortbay.jetty.bio.SocketConnector
Update the host with the IP address of the remote host.
c
d
Restart the jetty server.
server.xml
file available in the
server.xml
ColdFusion_installtion\cfusion\jetty\etc\jetty.xml
Last updated 7/9/2012
file available in the
runtime\conf
folder of the instance.
runtime\conf
.
.
11
folder of
Advertisement
Table of Contents
