Canon PowerShot G5 Software Starter Manual page 86

80
Operating the Shutter Remotely - RemoteCapture
The following limitations apply when the Viewfinder image is
displayed with a DIGITAL ELPH/DIGITAL IXUS series camera.
•The Viewfinder will automatically turn off after you shoot or
after 1 minute passes after it is turned on. Click [Viewfinder On]
again to turn it back on. However, you may have to wait a
moment for it to come back on if the camera body temperature
has risen.
•The camera's LCD monitor does not display while the
Viewfinder is on. In addition, the Video OUT settings cannot be
set with RemoteCapture.
Save-RemoteCapture Window
Thumbnail View
Displays thumbnails
of all the images
shot after
RemoteCapture is
started.
Image Display Area
Displays the image
selected in the
Thumbnail View.
Connect/Disconnect Button
Click here to open a connection to the camera and
display the Shooting-RemoteCapture window. It will
change to the Disconnect button while a connection is
open. Click it to close the connection.
Comments
Add a comment about the
image here.
Image Information
Check the image settings here.
View Button
Displays images
selected in the
Thumbnail View
area at a larger
size.
Delete Button
Deletes images
selected in the
Thumbnail View
area (completely
from the computer).
Histogram
Check the distribution of
brightness data here.