Powershot A70 - Canon PowerShot G5 Software Starter Manual

98

PowerShot A70

PowerShot A70
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
2
Set the mode switch to the replay mode and turn the camera's
power on. This will prepare the camera to exchange data with the
computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 104) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
RAW images cannot be recorded.
USB Port
1. Open the terminal cover by slipping a
USB Cable
2. Insert it all the way until it clicks.
fingernail in the groove and lifting.
To the Digital
Terminal