Asus SABERTOOTH 990FX/GEN3 R2.0 User Manual page 102

PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These
settings only apply when Fast Boot is enabled.
[Auto]
[Full Initialization] For full system control, PS/2 devices will be available during POST at
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
[Fast Boot]
DirectKey [Go to BIOS...]
[Disabled]
[Go to BIOS Setup]
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Set this item to [Enabled] to use ASUS MyLogo 2™ feature.
POST Delay Time [3 sec]
This item appears only when you set Full Screen Logo to [Enabled]. This item allows
you to select the desired additional POST waiting time to easily enter the BIOS setup.
You can only execute the POST delay time during Normal Boot. The values range from
1 to 10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Full Screen Logo to [Disabled]. This item allows
you to select a desired post report waiting time.
Configuration options: [1] - [10] [Until Press ESC]
3-32
For a faster POST time, PS/2 devices will only be available when the
system boots up or rebooted when the PS/2 devices have not been
reconnected or changed. If you disconnect or change PS/2 devices
before restarting the system, PS/2 devices will not be available and
BIOS setup program will not be accessible via PS/2 devices.
any circumstances. This process will extend POST time.
For the fastest POST time, all PS/2 devices will not be available until
your computer enters the operating system.
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
Returns to normal boot on the next boot after AC power loss.
Accelerates the boot speed on the next boot after AC power loss.
Disables the DirectKey function. The system will only power on or
off when you press the DirectKey button.
Allows the system to power on and go to BIOS Setup directly
when you press the DirectKey button.
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Chapter 3: BIOS setup