Asus P5GD1 User Manual page 49

8 . 8 . 8 . 8 . A T X p o w e r c o n n e c t o r s ( 2 4 - p i n E A T X P W R , A T X p o w e r c o n n e c t o r s ( 2 4 - p i n E A T X P W R , A T X p o w e r c o n n e c t o r s ( 2 4 - p i n E A T X P W R ,
8 . A T X p o w e r c o n n e c t o r s ( 2 4 - p i n E A T X P W R , A T X p o w e r c o n n e c t o r s ( 2 4 - p i n E A T X P W R ,
These connectors are for an ATX power supply. The plugs from the
power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
• It is recommended that you use an ATX 12 V Specification
2.0-compliant power supply unit (PSU) with a minimum of 300 W
power rating. This PSU type has 24-pin and 4-pin power plugs.
• If you intent to use a PSU with 20-pin and 4-pin power plugs, make
sure that the 20-pin power plug can provide at least 15A on +12V
and that the PSU has a minimum power rating of 300 W. The system
may become unstable or may not boot up if the power is
inadequate.
• Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
• The ATX 12 V Specification 2.0-compliant PSU passed the
motherboard power requirement test with the following
configuration:
CPU
Memory
Grpahics card
Parallel ATA devices :
Serial ATA device
Optical drives
SCSI devices
• You must install a PSU with a higher power rating if you intend to
install additional devices.
P5GD1
P5GD1 ATX power connectors
A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1
A S U S P 5 G D 1 A S U S P 5 G D 1
: Intel ® Pentium ® 4 3.6 GHz
: 512 MB DDR (x 4)
: PCI Express x16 Nvidia EN5900
IDE hard disk drive (x 2)
: SATA hard disk drive
: CD-ROM (x 2)
: SCSI card and SCSI hard disk drive
ATX12V
+12V DC GND
+5V Standby
+12V DC GND
Power OK
4 - p i n A T X 1 2 V ) 4 - p i n A T X 1 2 V ) 4 - p i n A T X 1 2 V )
4 - p i n A T X 1 2 V ) 4 - p i n A T X 1 2 V )
EATXPWR
+3 Volts Ground
+12 Volts +5 Volts
+12 Volts +5 Volts
+5 Volts
-5 Volts
Ground Ground
+5 Volts Ground
Ground Ground
+5 Volts PSON#
Ground Ground
+3 Volts -12 Volts
+3 Volts +3 Volts
2 - 2 9 2 - 2 9 2 - 2 9
2 - 2 9 2 - 2 9