Electrolux WT2 Brochure & Specs

Electrolux Dishwashing
Glasswashers WT2
The Electrolux Dishwashing range is produced for customers with the highest conceivable demands for good
efficiency, economy and ergonomics for dishwashing operation. The product range comprises glasswashers,
undercounter dishwashers, hood type dishwashers, rack type dishwashers, flight type dishwashers and pot
and pan washers. The glasswasher range consists of models with different charging holes, in order to handle
glasses up to 290 mm height.
EASY TO INSTALL AND MAINTAIN
• Most models are equipped with
a drain pump to facilitate the
installation.
• Rinse booster pump available to
be installed on site or included in
some specific models.
• Simple service from the front.
EASY TO CLEAN
• The glasswashers have smooth
surfaces and a fully pressed wash
tank with rounded corners to
facilitate cleaning.
• All the internal elements (arms
and filter) are easily extractable.
• 304 AISI stainless steel front and
side panels, load bearing frame,
wash tank, tank filter and wash
and rinse arms.
EASY TO USE
• Built-in rinse water heater to
increase the temperature of the
final rinse water.
• Built-in rinse aid dispenser for
perfect rinsing results.
• Simple control panel.
• Two cycles (120 and 300
seconds); the longer cycle allows
the washing of crockery with a
higher degree of soil.
• An extra program for cold rinsing
of beer glasses.
CONSTRUCTION FEATURES
• Double skinned construction.
• Wash/rinse arms and nozzles in
stainless steel.
• Completely closed on the
reverse by a cover plate.
• All models finished in top quality
materials to aid durability.
EASY ON THE ENVIRONMENT
• 98% recyclable by weight.
• CFC free packaging.
• Low noise level.
• Developed and produced in ISO
9001 and ISO 14001 certified
factory.
402030