Download Print this page

Section 1194.23 - Sharp MX-6240N Support Manual

Voluntary product accessibility template
Hide thumbs Also See for MX-6240N:

Advertisement

form, including all directions and cues.
(o) A method shall be provided that permits users to skip
repetitive navigation links.
(p) When a timed response is required, the user shall be
alerted and given sufficient time to indicate more time is
required.
Note to 1194.22: The Board interprets paragraphs (a) through (k) of this section as consistent with the
following priority 1 Checkpoints of the Web Content Accessibility Guidelines 1.0 (WCAG 1.0) (May 5 1999)
published by the Web Accessibility Initiative of the World Wide Web Consortium: Paragraph (a) - 1.1, (b) -
1.4, (c) - 2.1, (d) - 6.1, (e) - 1.2, (f) - 9.1, (g) - 5.1, (h) - 5.2, (i) - 12.1, (j) - 7.1, (k) - 11.4.
Return to the top of the page.
Criteria
(a) Telecommunications products or systems which
provide a function allowing voice communication and
which do not themselves provide a TTY functionality shall
provide a standard non-acoustic connection point for
TTYs. Microphones shall be capable of being turned on
and off to allow the user to intermix speech with TTY use.
(b) Telecommunications products which include voice
communication functionality shall support all commonly
used cross-manufacturer non-proprietary standard TTY
signal protocols.
(c) Voice mail, auto-attendant, and interactive voice
response telecommunications systems shall be usable by
TTY users with their TTYs.
(d) Voice mail, messaging, auto-attendant, and interactive
voice response telecommunications systems that require a
response from a user within a time interval, shall give an
alert when the time interval is about to run out, and shall
provide sufficient time for the user to indicate more time is
required.
(e) Where provided, caller identification and similar
telecommunications functions shall also be available for
users of TTYs, and for users who cannot see displays.
(f) For transmitted voice signals, telecommunications
products shall provide a gain adjustable up to a minimum
of 20 dB. For incremental volume control, at least one
intermediate step of 12 dB of gain shall be provided.
(g) If the telecommunications product allows a user to
adjust the receive volume, a function shall be provided to
automatically reset the volume to the default level after
every use.
Support

Section 1194.23

Telecommunications Products – Detail
VPAT™
Voluntary Product Accessibility Template
Supporting Features
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
The user interfaces are designed to allow users to
easily skip the repetitive navigation links.
No user interfaces that require a timed response
from users are provided.
®
Remarks and explanations
Page 6 of 16

Advertisement

loading

This manual is also suitable for:

Mx-7040n