Asus P4V800D-X User Manual page 60

After you have set a supervisor password, the other items appear to allow you to
change other security settings.
Security Settings
Supervisor Password : Installed
User Password : Installed
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
User Access Level [Full Access]
Allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access].
No Access prevents user access to the Setup utility.
View Only allows access but does not allow change to any field.
Limited allows change only to selected fields, such as Date and Time.
Full Access allows viewing and changing all the fields in the Setup utility.
Change User Password
Select this item to set or change the user password. The User Password item on
top of the screen shows the default Not Installed. After you have set a password,
this item shows Installed.
To set a User Password:
1. Select the Change User Password item and press <Enter>.
2. On the password box that appears, type a password combination of at least six
(6) letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted. The message "Password Installed"
appears after you have successfully set your password.
The User Password item now shows Installed.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item if you wish to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup
utility. When set to [Always], BIOS checks for user password both when accessing
Setup and booting the system. Configuration options: [Setup] [Always]
ASUS P4V800D-X Motherboard
<Enter> to change
password.
<Enter> again to
disable password.
[Full Access]
[Setup]
←→
↑↓
Enter Change
F1
F10
ESC
Select Screen
Select Item
General Help
Save and Exit
Exit
2-27