Asus P4V800D-X User Manual page 29

3. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
P4V800D-X
P4V800D-X SATA connectors
Important notes on Serial ATA
• You must install Windows
or newer OS versions before using Serial ATA hard disk drives.
• The Serial ATA interface is not supported when using Windows
operating system.
4. CPU, power and chassis fan connectors (3-pin CPU_FAN, PWR_FAN,
CHA_FAN)
The fan connectors support cooling fans of 350 mA~740 mA (8.88 W max.) or
a total of 1 A~2.22 A (26.64 W max.) at +12V. Connect the fan cables to the
fan connectors on the motherboard, making sure that the black wire of each
cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
P4V800D-X
P4V800D-X Fan connectors
ASUS P4V800D-X Motherboard
SATA2
SATA1
®
®
2000 SP4, Windows
CPU_FAN
GND
+12V
Rotation
PWR_FAN
®
GND
+12V
Rotation
® ®
XP SP1, Windows 2003,
®
98SE/Me
CHA_FAN
GND
+12V
Rotation
1-19