Asus P4T-EM User Manual page 37

3. HARDWARE SETUP
16) IDE Activity LED (2-pin HDLED)
This connector supplies power to the cabinet's IDE activity LED. Read and
write activity by devices connected to the Primary/Secondary IDE and Primary/
Secondary ATA100 connectors will cause the LED to light up.
P4T-EM
®
P4T-EM HDD Activity LED
17) SMB Connector (5-1 pin SMB)
This connector allows you to connect SMBus (System Management Bus) de-
vices. SMBus devices communicate by means of the SMBus with an SMBus
host and/or other SMBus devices. SMBus is a specific implementation of an
I2C bus, which is a multi-device bus; that is, multiple chips can be connected to
the same bus and each one can act as a master by initiating data transfer.
P4T-EM
®
P4T-EM SMBus Connector
TIP: If the case-mounted LED does not
light, try reversing the 2-pin plug.
ASUS P4T-EM User's Manual
HDDLED
SMB
1
37