Asus P4T-EM User Manual page 17

3. HARDWARE SETUP
1) Motherboard Frequency Settings (SW1)
The motherboard frequency is adjusted through the DIP switches. The white
block represents the switch's position. The illustration below shows all the
switches in the OFF position.
P4T-EM
®
P4T-EM DIP Switches
2) Onboard Power Signal (LED)
The board LED illuminates if power is connected and operating okay and when
the system is in soft-off or suspend mode. Adding or removing devices is not
advisable when the LED is lit, since the user risks electrical shock and/or
disabling system configuration.
P4T-EM
®
P4T-EM Onboard LED
SW1
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
ON
Standby
Power
ASUS P4T-EM User's Manual
ON OFF
OFF
Powered
Off
17