Table of Contents
Advertisement
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
Power Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the
CPU, chassis, and power fan speeds in rotations per minute (RPM). If any
of the fans is not connected to the motherboard, the specific field shows
N/A.
CPU Fan Control [Disabled]
This item allows you to enable or disable the ASUS Q-Fan feature that
smartly adjusts the fan speeds for more efficient system operation. When
this field is set to [Enabled], the CPU Fan Ratio item appears to allow
selection of the appropriate fan speed ratio. Configuration options:
[Disabled] [Enabled]
CPU Fan Ratio [11/16]
This item allows you to select the appropriate fan speed ratio for the
system. The default [11/16] is the minimum fan speed ratio. Select a
higher ratio if you installed additional devices and the system requires
more ventilation. Configuration options: [11/16] [12/16] [13/16] [14/16]
[15/16]
The above item appears only when the CPU Fan Control item is set to
Enabled.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
If any of the monitored items is out of range, the following error
message appears: "Hardware Monitor found an error. Enter Power
setup menu for details". You will then be prompted to "Press F1 to
continue or DEL to enter SETUP".
4-30
Chapter 4: BIOS Setup
Advertisement
Table of Contents
