Asus P4S800D-E Deluxe User Manual page 127

Creating an Array for Performance (RAID 0)
Follow these steps to create a RAID 0 array:
You must have at least two hard disks installed to create a RAID 0
array.
1. From the SIS 180 RAID utility menu, click the Configuration tab then
Create Raid.
2. Click the Raid Type combo list box and select RAID 0.
3. Click the Block Size combo list box and select a block size you want.
4. Click the Mode combo list box and select a mode you want.
5. From the Available Disks pane, select a disk then click the down
arrow to add the disk on the Selected Disks pane.
5. After all fields and parameters are set, click the Create button to
display the Create Stripe RaidSet dialog box.
Item Notes:
Source:
Target:
Create Only:
ASUS P4S800D-E Deluxe motherboard
Displays the first selected disk.
All available disks except the first selected disk.
This operation will destroy all data on the selected
disk and create a clean stripe array without any data.
5-21