Checking The Ink Volume; Packing And Shipping The Machine - Brother DCP-J140W Advanced User's Manual

Checking the ink volume

You can check the ink that is left in the
cartridge.
a
Press Menu.
b
Press a or b to choose 1.Ink.
Press OK.
c
Press a or b to choose 3.Ink Volume.
Press OK.
The LCD shows the ink volume.
BK:-ooooonn+
d
Press a or b to choose the color you
want to check.
e
Press Stop/Exit.
Note
You can check the ink volume from your
computer.
uuSoftware User's Guide: Printing
®
(Windows )
uuSoftware User's Guide: Printing
(Macintosh)
12
A
e
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, any damage that may occur in
transit may not be covered by your warranty.
The machine should be adequately insured
with the carrier.
Important
It is important to allow the machine to
"park" the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Open the ink cartridge cover.
b
Press the ink release levers to release
the ink cartridges and then take out the
ink cartridges.
(uuBasic User's Guide: Replacing the
ink cartridges)
A