Connect The Usb Cable - Brother DCP-J140W Quick Setup Manual

USB
12

Connect the USB cable

a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
b
Connect the USB cable to the USB port
marked with a
USB port inside the machine as shown below.
USB
symbol. You will find the
c
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your computer.
Important
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c.
2
e
The installation will continue automatically.
The installation screens appear one after
another.
Important
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
®
Windows
1
3
11