Asus M4A88TD-V EVO/USB3 User Manual page 126

4. Right-click on the Windows
then click Personalize from the shortcut
menu.
5. Click Display Settings. Select [Default
Monitor] on ATI Radeon HD 4250
Graphics, then select the check boxes
of This is my main monitor and
Extend the desktop onto this monitor.
Click OK, and then Yes from the
confirmation window.
6. Restart the system. Right-click on
the Windows
CATALYST(R) Control Center from
the shortcut menu. The ATI CATALYST
Control Center screen appears.
7. Click Graphics Settings > CrossFire™, then select the Enable CrossFire™ check
box. When a confirmation pops up, click Yes. The screen blacks out for about one
minute.
8. Click OK. The onboard graphics card is set to be the main monitor.
If you are using both an add-on and the on-board graphics cards at same time and want to
set the onboard graphics card as your main monitor, follow the below instructions.
1. Follow steps 1 to 3 on Using the onboard graphics card.
2. From the ATI CATALYST(R) Control
Center screen, click Display Manager >
Graphics Adapter. Select ATI Radeon
HD 4250 Graphics [Gabbs, G HW173].
Click OK, and then Yes from the
confirmation window.
3. Follow steps 6 to step 8 on Using the
onboard graphics card to complete
the process of setting up the onboard
graphics card as your main monitor.
5-6
E5888_M4A88TD-V EVO-USB3_Content6 6
desktop,
®
desktop, then click ATI
®
Chapter 5: ATI CrossFireX™ technology support
®
5/26/10 3:46:40 PM