Advertisement
BIOSTAR BIOS flasher
BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple
way to update your BIOS via USB pen drive.
1. This utility only allows storage device with FAT32/16 format and single partition.
2. Shutting down or resetting the system while updating the BIOS will lead to system boot
failure.
The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press <F12>
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIOSTAR BIOS Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, copy and save the BIOS file into a USB flash (pen) drive.
3. Insert the USB pen drive that contains the BIOS file to the USB port.
4. Power on or reset the computer and then press <F12> during the POST process.
5. After entering the POST screen, the BIOS-
FLASHER utility pops out. Choose [fs0] to search for
the BIOS file.
6. Select the proper BIOS file, and a message asking
if you are sure to flash the BIOS file. Click Yes to start
updating BIOS.
7. A dialog pops out after BIOS flash is completed,
asking you to restart the system. Press the [Y] key to
restart system.
8. While the system boots up and the full screen logo shows up, press
key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore Defaults
function to load Optimized Defaults, and select Save Changes and Reset to restart the
computer. Then, the BIOS Update is completed.
All the information and content above about the software are subject to be changed
without notice. For better performance, the software is being continuously updated. The
information and pictures described above are for your reference only. The actual information
and settings on board may be slightly different from this manual.
<Delete>
Advertisement
