NETGEAR WNDR3700v1 - N600 Wireless Dual Band Gigabit Router User Manual page 48

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
2. From the main menu, select Wireless Settings, and then click Setup Access List to display the
Wireless Card Access List screen.
Figure 3-1
3. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup screen opens and displays a list of currently active wireless cards and their
Ethernet MAC addresses.
Figure 3-2
4. Adjust the list as needed for your network. You can add devices using either of the following
methods:
• If the computer is in the Available Wireless Cards table, select the radio button of that
computer to capture its MAC address.
Protecting Your Network
v1.3, October 2009
3-3