Active Data Connections; Synchronization - Nokia N97 User Manual

WLAN internet access points
Select Menu Settings
>
Destinations Access
>
instructions.
To edit a wireless LAN (WLAN) access point, open one
of the access point groups, and select an access point
marked with . Follow the instructions from your
WLAN service provider. Select from the following:
Wi-Fi network name
●
Search for networks. If you select an existing
network, WLAN network mode and WLAN security
mode are determined by the settings of its access
point device.
Network status — Define whether the network
●
name is displayed.
Wi-Fi network mode
●
ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is
not needed. In an ad hoc network, all devices must
use the same WLAN network name.
Wi-Fi security mode
●
WEP, 802.1x, orWPA/WPA2
WPA2 are not available for ad hoc networks). If you
select Open network, no encryption is used. The
WEP, 802.1x, and WPA functions can be used only if
the network supports them.
Homepage — Enter the web address of the starting
●
page.
and Connectivity
>
point, and follow the
— Select Enter manually
— Select Ad-hoc to create an
— Select the encryption used:
(802.1x and WPA/
Use access point
●
connection using this access point automatically or
after confirmation.
Available options may vary.

Active data connections

Select Menu Settings
>
Connection mgr..
or
In the active data connections view, you can see open
data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
To end a connection, select
To end all open connections, select
Disconnect all.
To view the details of a connection, select
Details.

Synchronization

Select Menu Settings
>
transfer > Sync.
The Synchronization application enables you to
synchronize your notes, calendar entries, text and
— Set the device to create a
and Connectivity
>
Options > Disconnect.
Options
>
Options
and Connectivity
>
>
Data
75