Nokia N86 8MP User Manual page 150

Access point — Select the access point to use for
●
the connection, or create a new access point. You
can also choose to be asked for the access point
every time you start a connection. This setting is
available only if you have selected
bearer type.
Host address
●
configuration server.
Port — Enter the port number of the server.
●
User name and
●
password for the configuration server.
Allow configuration
●
server to initiate a configuration session.
Auto-accept all requests
●
not want the server to ask for your confirmation
when it initiates a configuration session.
Network authentication
●
http authentication.
Network user name
●
password — Enter your user ID and password for
the http authentication. This setting is available
only if you have selected
authentication
To connect to the server and receive configuration
settings for your device, select
configuration.
To view the configuration log of the selected profile,
select Options
>
150
Internet
— Enter the web address of the
Password — Enter your user ID and
— Select Yes to allow the
— Select Yes
— Select whether to use
and Network
Network
to be used.
Options
>
View log.
To update the device software over the air, select
Options
>
erase your settings. When you receive the update
package on your device, follow the instructions on the
as the display. Your device is restarted once the installation is
complete. Downloading software updates may involve
the transmission of large amounts of data (network
service). Make sure that the device battery has enough
power, or connect the charger before starting the
update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
if you do
restarted. Be sure to back up data before accepting
installation of an update.
Start
Check for updates. The update does not