Locking The Keypad; Unlocking The Keypad; Using Special Numbers; Erasing The Internal Phone Book - Sanyo 4700 - SCP Cell Phone User Manual

Locking the Keypad

Locking the keypad helps avoid accidental key presses
without blocking incoming calls or messages. This feature
can only be activated when your phone is in Standby mode.
To lock your keypad:
Tip:
From the main menu, highlight
You can receive an 1.
incoming call while
.
your keypad is locked.
Once you end the call,

Unlocking the Keypad

keyguard Automatically
Press and hold
reactivates. 1.

Using Special Numbers

You can save three special numbers in addition to your
Internal Phone Book entries. (They can be the same
number.) You can make and receive calls from special
numbers even when your phone is locked.
To add or replace a special number:
From the
1.
.
Highlight the entry number where you would like to store
2.
the number, and press
Enter the Phone number.
3.
Highlight
4.

Erasing the Internal Phone Book

To erase all the names and phone numbers in your Internal
Phone Book:
From the
1.
and press
Highlight
2.
Section 12
100 Setting Your Phone's Security
and press
KeyGuard
for two seconds.
menu, highlight
Security Special #s
.
and press .
Save
menu, highlight
Security Erase PhoneBook
.
, and press .
Yes

Resetting Your Phone

From the
1.
press
Highlight
2.
Resetting and Locking Your Phone through SMS
When your phone is lost or stolen, you can erase your
important personal information (such as phone book
entries, call history and messages) and lock your phone by
sending a special formatted SMS message to your phone.
Send the following format from your computer:
\\RESET **<Passcode>**RESET
<Passcode> – your defined passcode.
The locked phone will display the following message:
and press
"If found, please call Sprint PCS Customer Care 1-888-217-
4727."
To activate this feature, the following presetting is required:
From the
1.
Highlight
2.
Highlight
3.
To unlock a phone that has been locked through SMS,
bring the phone to Sprint PCS Retail Store.
menu, highlight
Security Reset Phone
.
, and press .
Yes
Default Passcode is 11-digit ESN
(Electronic Serial Number) which is
described on the package or phone itself.
menu, highlight
Security Found Me
.
, and press .
Reset/Lock
, and press .
Enable
Setting Your Phone's Security 101
and
and press
Section 12