Sending A Data Call; Receiving A Data Call - Motorola A780 - Smartphone - GSM User Manual

CG.GSM.A780.book Page 121 Thursday, November 11, 2004 4:05 PM
2 Tap Use to select USB Cable, or Bluetooth as your
connection method.
Tip: If you use a serial cable for data
transmission, tap Baud Rate and specify a baud rate
for the connection.
3 Tap Find Device to complete the modem connection.
When your phone indicates Modem Status: Ready, use your
computer to access the Internet or transfer data just
as you would with a standard computer modem.

Sending a Data Call

1 Open the application (such as
dial-up-networking) on your computer, and
place the call through the application.
Note: You cannot dial data numbers on your
phone's keypad. You must dial them through
the computer.
2 When the data transfer is complete, end the call
from the connected device to close the
connection.

Receiving a Data Call

1 Your phone notifies you when the data call
arrives, and transfers the call to the connected
device. Use the application running on the device
to answer the call.
121