Using Voice Recognition - Motorola A780 - Smartphone - GSM User Manual

CG.GSM.A780.book Page 129 Thursday, November 11, 2004 4:05 PM
Press and hold the VR key on the right side of your
phone until the Loading VR message displays on the
screen to indicate that voice recognition is loading.
When your phone displays VR Loading Complete, you can
start using voice instructions. If your phone indicates
that loading failed, try again to load the voice
recognition application.

Using Voice Recognition

After loading the voice recognition application on
your phone, press and hold the VR key on the right
side of your phone until the phone sounds an alert
tone. Speak a voice instruction as described below,
then release the VR key to perform the
corresponding function.
The voice instruction function operates in 2
modes: name/instruction mode, and digit mode.
The default operating mode is name/instruction.
When you speak the command "Open Digit Dial" or
"Open Dial Pad," your phone switches to digit mode
so you can speak the phone number you want to
dial.
Note: Your phone remains in digit mode for a few
seconds after each number recognition, and then
automatically returns to name/instruction mode.
Note: VR can also be used to open applications
(Home Page, Open Setup, Open Camera, Open
Email). For a list of all commands refer to the Voice
Dialing submenu in Setup.
129