Table of Contents
Advertisement
2297_Bell_PCC6600_GSG_R7
3/22/05
s e t t i n g u p y o u r d e v i c e f o r w i r e l e s s u s e
Your device should already be programmed by your Bell Mobility or Bell World
representative for use on the Bell Mobility network. You should have the following
information :
i. Mobile Number
ii. Voice mail password (4-digit number)
If you are missing any of the above information, please call Bell Mobility Customer
Service at 1-800-667-0123 prior to starting this process.
Setting up the
Connection:
Make sure your wireless connection is enabled before you start (this will allow you to
use the phone and access data). To do so, you must ensure that your connection
reads
Flight Mode OFF.
What is
Flight
Mode?
On all airplane flights, you are requested to turn off your wireless device. When
you are getting ready for take-off, you should enable
when your PPC-6600 has
Flight Mode
turned off. In this mode you will still be able to access offline information
including Calendar, Contacts, etc. and will also help conserve battery power since
the device is not being used for wireless access.
When
Flight Mode
is OFF, your phone is turned
on and you are able to make calls and access
data (i.e. Internet & E-mail). Your
should always be
OFF
unless you need to
completely shut down your device.
To turn
Flight Mode
ON, which turns your
phone off, tap the
icon and then tap
on Flight
Mode'.
To turn your
Flight Mode
OFF, which turns your
phone on, simply tap on the
'Turn off Flight
Mode'.
1. Go to 'Start', then 'Settings'.
2. Tap on the 'Connections' tab.
3. Tap on 'Connections'.
4. Tap
'Manage Existing
Connections'.
6
9:25 AM
Page 6
Flight
Mode. Therefore,
ON, it means that your phone has been
Flight Mode
'Turn
icon. Then, tap
5. Under 'Cdma2000', tap and hold 'CDMA1X' until the
'Delete/Connect' menu appears.
6. Tap 'Connect'. When you see
, it means a data
connection has been established.
7. Tap 'OK'.
To disable your wireless DATA connectivity, simply hold
down
button for a minimum of 5 seconds. You
know your data connectivity is disabled when you see
the
and
icon. Your device will then be ready for
making and receiving voice calls.
Note: While you are using Pocket Explorer, if it is in the process of trying to
download the page, hitting the
button will not terminate the data connection.
The device will try to reconnect instead. Wait until the web page has finished
downloading and then hit the
button to end the data session.
To start a data connection:
Once you have successfully set-up your 1X connection, ensure
and your phone is turned
ON
. To do this:
i. Tap
ii. Tap #777, when you see
, it means a data connection has been
established.
Once connected, you can:
• Send and receive e-mail messages by using Messaging. Before you can use
Messaging, you need to provide the information it needs to communicate with the
e-mail server. For specific instructions, see Setting Up Your POP3 E-mail Account
(see next page).
• Visit Web and WAP pages by using Pocket Internet Explorer.
Note: A pop-up screen will appear once you begin connecting, and leave when the
connection is complete.
Flight Mode
is OFF,
7
Advertisement
Table of Contents
