With Latch - Acura 2008 RDX Owner's Manual

Hide thumbs Also See for 2008 RDX:
Table of Contents

Advertisement

Installing a Child Seat with
LATCH
Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) at the rear seats to
secure a child seat in any seating
position: one in each outer seating
position, or one in the center.
The five lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
BUTTON
LOWER ANCHORS
FOR CENTER LATCH
LOWER ANCHORS
FOR OUTER LATCH
The location of each lower anchor is
indicated by a small button above the
anchor point.
When you install a child seat in the
rear center seating position, use the
center LATCH as shown in the
illustration. To install a child seat in
the outer seating position, use either
LATCH. You can install up to two
child seat at a time with outer
LATCH.
Installing a Child Seat
Using the Outer LATCH
OUTER LOWER ANCHORS
To install a LATCH-compatible child
seat in either of the rear outer seats:
1.
Move the seat belt buckle or
tongue away from the lower
anchors.
2.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
CONTINUED
45

Advertisement

Table of Contents
loading

Table of Contents