Acura 2008 RDX Owner's Manual page 355

3. Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
4. Turn on the lights to make sure
the new bulb is working.
Replacing Rear Bulbs
(in Tailgate)
COVER
NOTCH
1. Open the tailgate. Place a cloth on
the edge of the light assembly
cover. Remove the cover by
carefully prying in the notch on its
middle edge with a flat-tip
screwdriver.
2. Determine which of the two bulbs
is burned out: taillight or back-up
light.
Lights
BULBS
SOCKETS
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
CONTINUED
349