Display - Honda 2009 CR-V Navigation Manual

Display

There are two screen display modes:
Day Mode Night Mode
Day and Night. The recommended
setting is Auto, which automatically
switches the screen between Day and
Night modes as you turn the headlights
on or off.
You can select Day or Night mode to
override the Auto mode. This is a
useful feature for drivers that like to use
headlights during the day and want to
temporarily override Night mode.
However, the screen in Day mode will
be extremely bright at night.
Display How setting affects
Mode display mode:
Auto Automatically switches
between Day and Night
(factory
default) mode by sensing if the
headlights are on.
Day Stays in Day mode.
Night Stays in Night mode.
Clock Displays the clock on
the screen.
To override setting But remember:
while driving:
Override night display: Adjust the dash
Adjust dash brightness brightness (with
(with headlights on) to headlights on) back to
full bright. normal to allow auto
Override day display: switching by sensing
Turn on headlights and headlights.
ensure the dash
brightness is not at full
bright.
There is no auto Night/
Push and hold the
joystick for 10 seconds Day mode change with
(switches to Night
the headlights on/off.
mode). You control the setting.
Push and hold the There is no auto Night/
Day mode change with
joystick for 10 seconds
(switches to Day mode). the headlights on/off.
You control the setting.
To return to the previous Touch any button to
screen, press the NAVI
return to your last
BACK button. screen.
Navigation System
System Setup
73