Driving To Your Destination; Calculate Route To Screen - Honda 2009 CR-V Navigation Manual

Driving to Your Destination

Driving to Your Destination
A route typically has three phases.
• Initial route calculation (Calculate
route to screen) (see page 44).
• Change the route while en route (see
page 62).
• Resume the route when restarting the
engine (see Continue Trip Screen on
page 67).
44
Navigation System

Calculate Route to Screen

Say or select OK. The system calculates
the route using the method shown on the
screen (see Map Screen on page 47).
NOTE:
• Prior to departure, you can set areas
to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area on page 86.
• For information on the available
voice commands, see Voice
Command Index on page 137.
Further selections from the Calculate
route to screen include:
ADD TO Address Book
Allows you to add the destination to
your Address Book. See By Address
Book on page 42.
NOTE:
If the button is grayed out, the
destination is already in your Address
Book.
ADD TO Today's Destinations
Allows you to add the destination to
your Today's Destinations list. See By
Today's Destinations on page 40.
NOTE:
If the button is grayed out, the Today's
Destinations list is already full (five
destinations have been stored).