Security - Acer Ferrari 4000 Service Manual

Security

The Security screen contains parameters that help safeguard and protect your computer from
unauthorized use.
Info.
Supervisor Password Is:
User Password Is:
HDD Password Is:
HDD Master ID:
Set Supervisor Password
Set User Passord
Set HDD Password
Password on Boot
F1 Help
↑ ↓
← →
Esc Exit
If password on boot is required, the password must be set otherwise it cannot be enabled.
The formats of the password are as follows:
Length 10 characters
Characters Alphanumeric keys only. The shift status i.e. Ctrl, Shift, Alt and Capital are ignored.
The table below describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings.
Parameter
Supervisor Password Is
User Password Is
HDD Password Is
HDD Master Is
Chapter 2
PhoenixBIOS Setup Utility
Main Advanced
Clear
Clear
Clear
15722749
[Enter]
[Enter]
[Enter]
[Disabled]
Select Item
Select Menu
Clear
Clear
This feature is available to user when Supervisor password is set. Password can
be written on HDD only when Supervisor password or user password is set and
password on HDD is set to enabled. Supervisor Password is written to HDD only
when Supervisor password is being set. User password is written to HDD when
both passwords are set. When both Supervisor and user password are present,
both passwords can unlock the HDD.
N/A
Security
F5/F6 Change Values
Enter Select Sub -Menu
Description
Exit
Boot
Item Specific Help
Supervisor Password
controls access to the
setup utility.
F9 Setup Defaults
F10 Save and Exit
52