3.6
Disassembling the Inside Frame Assembly
This section discusses how to disassemble the housing, and during its course, includes removing
and replacing of certain major components like the internal drive (CD-ROM or floppy), CPU and the
main board. Follow these steps:
3.6.1
Removing the Heat Sink Assembly
Follow these steps to remove the heat sink assembly:
1.
Pull up and remove the LED cover.
Figure 3-11
Removing the LED Cover
2.
Remove the five screws that secure the heat sink assembly to the housing.
Figure 3-12
Removing the Heat Sink Assembly
3-12
Service Guide