3.
Detach the display from the main unit and set aside.
Figure 3-15
Removing the Display Hinge Screws
3.6.3
Removing the Internal Drive
Follow these steps to remove the internal drive:
1.
Pull up the FDD/CD module latches.
2.
Unplug the two internal drive cables (CN16 for FDD; CN13 and CN16 for CD-ROM).
3.
Pull out the internal drive and set it aside.
3-14
Ensure the drive cables do not become hooked on the inside frame assembly
when removing and reinstalling the drive.
Service Guide