Removing The Cpu And Vga Heatsink Module - Acer Ferrari 1200 Service Manual

Removing the CPU and VGA Heatsink Module

1. See "Removing the Battery Pack" on page 64.
2. See "Removing the SD dummy card" on page 64.
3. See "Removing the ExpressCard dummy card" on page 65.
4. See "Removing the Lower Cover" on page 65.
5. See "Removing the DIMM" on page 66.
6. See "Removing the WLAN Board Modules" on page 67.
7. See "Removing the Hard Disk Drive Module" on page 68.
8. See "Removing the Keyboard" on page 71.
9. See "Removing the Middle Cover" on page 72.
10. See "Removing the LCD Module" on page 74.
11. See "Separating the Upper Case from the Lower Case" on page 78.
12. See "Removing the Main Board" on page 89.
13. Disconnect the heatsink fan connector from the main board.
14. Remove the four screws (E) securing the CPU and VGA heatsink module in place.
Step
1~4
92
Size (Quantity)
M2 x L4 (4)
Color
Silver
Torque
1.6 kgf-cm
Chapter 3