Power Management
Power Saving Mode
Standby Mode
Waiting time specified by the System Standby value or the
operating system elapses without any system activity.
Or
When the computer is about to enter Hibernation mode
(e.g., during a battery-low condition), but the Hibernation
file is invalid or not present.
Hibernation Mode
When customized functions for power management are
set to Hibernation and the corresponding action is taken.
Display Standby Mode
Keyboard, built-in touchpad, and an external PS/2 pointing
device are idle for a specified period.
Hard Disk Standby Mode
Hard disk is idle within a specified period of time.
Environmental Requirements
Item
Temperature
Operating
Non-Operating
Humidity
Operating
Non-Operating
Vibration
Operating (Unpacked)
Non-Operating
Unpacked
Packed
Mechanical Specifications
Item
Dimensions
Weight
I/O Ports
Drive Bays
Material
Indications
Switch
24
The buzzer beeps
The Standby indicator lights up
All power shuts off
The display shuts off
Hard disk drive is in standby mode.
(spindle turned-off)
+5 ~ +35 Degree C
-20 ~ + 60 Degree C
20% ~ 80% RH, Non-condensing
20% ~ 90% RH, Non-condensing
5 ~ 25.6 Hz,
0.38 mm
5 ~ 27.1 Hz,
0.6G
27.1 ~ 50 Hz,
0.41 mm
50 ~ 500 Hz,
2G
5 ~ 62.6 Hz,
0.51 mm
62.6 ~ 500 Hz,
4 G
308mm x 257mm x 44.7mm
7lbs (Battery included)
Mouse, 1 Parallel, 1 Serial, 1 USB, 1 Modem Jack,
1 PCMCIA Slot, 1 VGA Port, 1 Microphone Jack, 1 Line-in Jack, 1
Line-out Jack
One 3.5" FDD, One CD-ROM
Plastic
Power Light, Sleep Mode Light, Media Activity Light, Battery Charge
Light, Caps Lock Light, Numbers Lock Light
Power
Phenomenon
Specification
Specification
Chapter 1