Table of Contents
Advertisement
2.
Remove the screw shown here.
3.
Remove the CD-ROM drive screw cap from the bottom of the main unit.
4.
Remove the screw shown here.
5.
Now, remove the floppy disk drive and CD-ROM drive combo module from the main unit.
Removing the Speakers
1.
Disconnect the left and right speaker cables from the audio I/O and battery connection board at CN1 and
CN2 respectively.
2.
Remove the four screws holding the two speakers, then remove the two speakers from the lower case.
52
Chapter 3
Advertisement
Table of Contents
