Starting A Washing Programme - AEG FAVORIT 85480 VI Instruction Book

Starting a washing programme

In this fully integrated appliance the controls are located on the top of
the door. When selecting a programme, the door needs to be open.
1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Press the On/Off button
The indicator lights of the programme selection buttons illuminate.
4. Setting and starting the programme
To select a programme, press the button of the programme you
wish to select (see "Washing programmes" chart).
The corresponding indicator light remains illuminated while the
other programme buttons indicator lights turn off.
In the digital display will appear, flashing, the running time (in
minutes) of the programme that has been set.
Close the dishwasher's door, the programme will start
automatically.
Setting and starting the programme with the delay start
Once the washing programme has been selected press the delay
start button, the corresponding indicator light will illuminate and
in the digital display appears 1h.
Press the delay start button until in the digital display will appear
the number of hours desired (from 1 hour up to 19 hours).
Close the dishwasher door, the countdown starts automatically and
will decrease with steps of 1 hour.
The opening of the door will not modify or interrupt the
countdown.
Once the delay start has elapsed the washing programme will start
automatically.
Operating instructions
29