Starting A Washing Programme - AEG FAVORIT 44860 Instruction Book

Operating instructions

Starting a washing programme

1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off button
All the indicator lights of the programme selection buttons
illuminate.
5. Setting and starting the programme
To select a programme, press the programme button of the desired
washing programme (see "Washing programmes" chart).
The corresponding indicator light remains illuminated while the
other programme buttons indicator lights turn off.
In the digital display flashes the running time (in minutes) of the
selected programme.
The programme in progress indicator light illuminates.
After about 3 seconds from the last pressure of a button the
programme starts automatically.
In the digital display the running time of the programme is no
longer flashing and the programme in progress indicator light
remains illuminated.
Setting and starting the programme with the delay start
The setting of the delay start occurs before selecting the
programme
Press the delay start button until the flashing number of the hours
for the delay start will appear in the digital display (from 1h
to 19h).
Select a washing programme. In the digital display will appear, for
a moment, the running time of the programme and then again
appears the selected delay start time.
As soon as the number of hours is displayed without flashing, the
countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
26