Removing The Camera Module; Prerequisites; Procedure - Dell XPS 12 Owner's Manual

Removing the Camera Module

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover. See "Removing the Base Cover" on page 10.
2 Remove the battery. See "Removing the Battery" on page 13.
3 Remove the display back-cover. See "Removing the Display Back-Cover" on
page 47.

Procedure

1
Remove the screws that secure the camera module to the display panel.
2 Turn the camera module over and disconnect the camera cable from the
connector on the camera module.
3
Carefully lift the camera module off the display panel.
1
50
| Removing the Camera Module
3
2