Self Diagnosis Test - Panasonic CF-51JFDECBM - Toughbook 51 - Pentium M 2 GHz Service Manual

Self Diagnosis Test

1. Floppy disk is included for the self-diagnostic tests that should be performed before using this product.
2. Connect External Floppy Disk Drive (FDD) to USB port for diagnosis test.
Important notice
System password
This product has a password function. If this function is turned on, the self-diagnostics tests will not work.
You will need ask the user for the password before performing the self-diagnostics.
1. Outline of Self Diagnostic Tests
Return the setup
contents to default
Choose test from
the menu screen
to start the test.
Caution:
After completing repairs, be sure
to carry out the Automatic test
and Peripheraltest.
<Automatic test>
Tests selected (O) from the test
item list will be performed in
succession.
After completing repairs,be sure
to
carry out the test.
1. DIAG on FD
Insert the diagnostics floppy disk
Starting up the setup utility
Turn on the power .
When "Panasonic Press F2 to enter setup" appears
on the screen, press F2.
Press " " to select [ Exit ]
Press " " to select [ Get default value ]
Press Enter .
Choose Yes for "Load default Configuration now?"
Select "Save V alues & Exit" and press Enter
Choose Yes for "Save Configuration changes and exit now?"
and press Enter .
Menu Screen1
1. DIAG (without CD-ROM support)
2. CD-ROM test
Menu Screen2
1. DIAG on FD (CF-51)
2. Memory test
3. HDD read test
4. Parallel test
5. GLAN test
6 . Wireless LAN test (Wireless model only)
7. 1394 I/F test
8. Modem test
Q. Quit
<Peripheral test>
Function of I/F, LAN,Modem and
Wireless LAN can be tested.
After completing repairs,be sure
to
carry out the test.
Menu -- 4,5,6,7,8
Problems in the unit are located and divided according
to error messages that occur during testing.
Choose 1
Specifc tests required can
be freely selected and
performed from the test item
list.
Be sure to carry out the Selection
test only when necessary .
12-1
.
Choose 2
CD-ROM test is starting.
*
Set CD-ROM(except music CD)
before choosing 2.
<Test selection>