Replacing The Power Button Board - Dell Inspiron N5050 Owner's Manual

1
1 alignment post
3 power-button board cable
5 screw

Replacing the Power Button Board

1 Follow the instructions in "Before You Begin" on page 9.
2 Using the alignment post, place the power button board on the palm rest
assembly and snap it into place.
3 Replace the screw that secures the power button board to the palm rest.
4 Turn the palm-rest assembly over.
5 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
Assembly" on page 32.
6 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
36
Power Button Board
2
Before turning on the computer, replace all screws and ensure that no
2 tabs (2)
4 power button board
5
4
3