Replacing The Display Panel - Dell Inspiron N5050 Owner's Manual

1
2
1 tape
3 display cable

Replacing the Display Panel

1 Follow the instructions in "Before You Begin" on page 9.
2 Attach the display cable to the back of the display panel.
3 Connect the display cable to the display-board connector and secure it
with the tape.
4 Align the screw holes on the display bracket with the screw holes on the
display panel and replace the four screws (two on each side).
5 Route the display cable and Mini-Card antenna cables through the routing
guides on the display hinges.
6 Align the screw holes on the display panel with the screw holes on the
display cover and replace the six screws.
7 Replace the display bezel. See "Replacing the Display Bezel" on page 60.
8 Replace the display assembly. See "Replacing the Display Assembly" on
page 58.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
3
2 display-board connector
Display
63