Replacing The Camera Module - Dell Inspiron 14 - N4050 Owner's Manual

2
1 camera module
3 tabs (2)

Replacing the Camera Module

1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Use the alignment posts on the display cover to place the camera module
in position and snap the camera module into place.
4 Replace the display bezel. See "Replacing the Display Bezel" on page 63.
5 Replace the display assembly. See "Replacing the Display Assembly" on
page 61.
6 Replace the hinge cover. See "Replacing the Hinge Cover" on page 57.
7 Replace the USB board. See "Replacing the USB Board" on page 48.
70
Camera Module
3
1
2 camera cable