Keyboard Hot-Key-Command Shortcuts - Belkin F1DA116Z - OmniView PRO3 USB User Manual

Using your PRO3 KVM Switch

Keyboard Hot-Key-Command Shortcuts

Below is a complete list of hot-key commands that can be used for your
PRO3 KVM Switch:
Command
Space Bar
[01,02.,,,16] port
[00,01.,,,15] BANK
[01,02.,,,16] port
PgUP
PgDown
B
S
P
A
Delete
Note: You will have approximately three seconds to complete each
hot-key sequence.
34
Function
Activate OSD
Previous host
Next host
Non-daisy-chain KVM switch
Daisy-Chain Config: First and second digit specifies BANK
Daisy-Chain: Third and fourth digit specifies number
Previous BANK
Next BANK
Turn on/off beep while in AutoScan mode
Enable/disable OSD security
Turns console screen "Off", and prompts for user name
and password if security is enabled
Administrator activates AutoScan
Administrator sets the OSD back to factory-default values
(except for security settings)