Yamaha MCX-A10 - MusicCAST Network Audio Player Manual page 70

Problem
You cannot access The ANALOG REC LEVEL on the front
the MusicCAST preset panel of the MusicCAST server is set too
tuner. low.
The MusicCAST server AV receiver
parameters are configured incorrectly.
The AV receiver connected to the
MusicCAST server is not turned on.
The AV receiver is not correctly connected
to the MusicCAST server.
The AV receiver is not receiving a strong
radio signal.
Playback cuts off or Another MusicCAST component is
switches to another changing the tuner preset or external input
input when listening on the MusicCAST server.
to a tuner preset on
the MusicCAST client.
Auto Configuration
There is more than one DHCP server
does not appear to operation in the network trying to use the
work correctly.
same IP addresses.
Cause
Increase the ANALOG REC LEVEL.
Configure the AV receiver parameters correctly.
Turn the AV receiver on.
Correctly connect the AV receiver to the MusicCAST
server.
Refer to the owner's manual of your AV receiver.
Stop the other MusicCAST component from
changing input sources.
Deactivate the MusicCAST server DHCP function.
71
Troubleshooting
Remedy Refer to
page
MCX-
1000
owner's
manual,
page 29
MCX-
1000
owner's
manual,
page 122
—
MCX-
1000
owner's
manual,
page 122
—
48 – 51
MCX-
1000
owner's
manual
page 110