Maintenance; Specifications - Sharp SW330 Operation Manual

Maintenance

CD-SW330H
ENGLISH
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
Playback head
Capstans
Pinch rollers
After long use, the deck's heads and capstans may become
magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
E-43
B
A
TAPE 1
E B
D
TAPE 2
Erase head
Recording/Playback head

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source
C
Power consumption Power on: 235 W
Dimensions
C
Weight
* This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 9 to
cancel the demonstration mode.
CD player
Type
Signal readout
D/A converter
Frequency
response
Dynamic range
Tuner
Frequency range
AC 230 V, 50 Hz
Power stand-by: 0.6 W (*)
Width: 260 mm (10-1/4")
Height: 330 mm (13")
Depth: 323 mm (12-7/8")
10 kg (22 lbs.)
5-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz